Changes

Control switch on this model is a "momentary<nowiki>''</nowiki> switch. When  held down  on  the side next to remote cord, controller pulls down  on right cord; when held down on side away from cord, controller pulls down on left hand cord. When  released  from either  side, switch returns to "off<nowiki>''</nowiki> position and power is disconnected from motor.         

Control switch on this model is a "momentary<nowiki>''</nowiki> switch. When  held down  on  the side next to remote cord, controller pulls down  on right cord; when held down on side away from cord, controller pulls down on left hand cord. When  released  from either  side, switch returns to "off<nowiki>''</nowiki> position and power is disconnected from motor.         

'''Models A, AIR, DAIR, SCA, DA, 9938, 9939, 8-500-1, 8-508-1:''' After  controller   is  mounted   to   wall remove snap-on cover to expose drive mechanism. (See Fig. 3.)  Line up drapery cords in manner illustrated in upper right and grasp right hand cord firmly, pulling it through, between pressure roller B and driver roller A, pulling tightly around bottom of A and then between A and pressure roller C. Place cords in slots in actuator slide D as shown, holding it in position  until cover is re­placed.  Threading is complete and controller may now be plugged into 110 to 120 VAC power outlet.      

'''Models A, AIR, DAIR, SCA, DA, 9938, 9939, 8-500-1, 8-508-1:'''      

 

After  controller   is  mounted   to   wall remove snap-on cover to expose drive mechanism. (See Fig. 3.)  Line up drapery cords in manner illustrated in upper right and grasp right hand cord firmly, pulling it through, between pressure roller B and driver roller A, pulling tightly around bottom of A and then between A and pressure roller C. Place cords in slots in actuator slide D as shown, holding it in position  until cover is re­placed.  Threading is complete and controller may now be plugged into 110 to 120 VAC power outlet.              

'''REVERSING  DIRECTION OF DRAPE TRAVEL ''' is ac­complished only '''after''' it has reached end of run (fully open or fully closed). At that time depressing switch on the opposite side will start drape travel in other direction.     

'''REVERSING  DIRECTION OF DRAPE TRAVEL ''' is ac­complished only '''after''' it has reached end of run (fully open or fully closed). At that time depressing switch on the opposite side will start drape travel in other direction.